Description
CP 2102 USB 2.0 to TTL UART serial converter Module - 6 Pin
This is the CP2102 (6-pin) USB 2.0 to TTL UART serial converter module. This is a great little tool for embedded systems that require a serial connection to a computer. The board can simply attach to a USB bus and will appear as a standard COM port.
This breakout also allows you to connect the TX/RX pins of your favourite microcontroller or serial application to the RX/TX pins of the breakout, creating a simple serial cable replacement.
Note: This CP2102 doesn’t require any external oscillator, it onboard-board voltage regulator, and it even uses a reprogrammable internal EEPROM for the device description. The full hardware UART has flow control for baud rates from 300bps to 921600bps.
Supported operating systems
Windows 98/Me/2000/7
MAC OS-9
MAC OS
X-Windows CE
Linux 2.40 or later
Features :
- Brand new and high quality
- Included USB transceiver, without external circuit device
- Includes a clock circuit and power-on reset circuit
- With 3.3V and 5V dual power output
- With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
- Meet the USB2.0 specification requirements
- SUSPEND pin supports USB suspend state
- With self-recovery fuse. In the event of an accidental short circuit, it can effectively protect your computer USB port and Downloader
- With reset signal output, etc. directly to the Arduino board Pro mini download!
- Asynchronous serial data bus compatible with all handshake and modulation controller interface signals
- The supported data format is 8 data bits, 1 stop bit and parity bits
- Connotation 512 byte receive buffer and 512 bytes transmit buffer
- Supports hardware handshaking or X-ON/X-OFF