Description
"Introducing the 24V BMS 8S 20A LFP 32650 Lithium Battery Protection Board - A Revolutionary Product for Battery Safety"
- 8S 20A BMS
- Common Port for charge/discharge
- Voltage: 24V
- Charge Current: 10A
- Discharge Current: 20A
- Can be used in 3.2V Rated LiFePO4
- The circuit is simple and reliable.
- Typical voltage detection for each cell. So each battery will be prevented over charged or over-discharged. Over current and short circuit protection.
- Long-time short circuits of the load won’t affect the PCB and the battery.
- Temperature protection during charging and discharging.
- PCB uses high anti-corrosion, high water resistance, and high impedance ESD conformal Coating.
- Model: 8S for 3.2V Rated LiFePO4
- 8S 24V 20A BMS is used for 8 series 24V battery pack
- Common Version: common port for charge/discharge
- constant discharge current: 20A
- Charge Current: 10A
- Extremely low power consumption. The consumption of the whole device is less than 50uA.
|
8S 24V |
Details |
Specifications |
|
Discharge |
Maximal Continuous Discharging Current |
20A
|
|
|
Peak Discharging Current |
50A |
|
|
Over Current Protection Current |
50A |
|
Charge |
Charging Voltage |
30V(24V battery) |
|
|
Charging Current |
10A |
|
Overcharge protection |
Over Charge Detection Voltage |
3.65 ± 0.025V |
|
|
Over Charge Detection Delay Time |
0.5S |
|
|
Over Charger Release Voltage |
3.65 ± 0.025V |
|
Cell balancing |
Cell balancing Detection Voltage |
3.6V |
|
|
Cell balancing Release Voltage |
3.6V |
|
|
Cell balancing Current |
35 ± 5mA |
|
Over-discharge protection |
Over Discharge Detection Voltage |
2.8±0.05V |
|
|
Over Discharge Detection Delay |
Time 0.5S |
|
|
Over Discharger Release Voltage |
2.5 ± 0.05V |
|
Over current protection |
Over Current Detection Voltage |
200mV |
|
|
Over Current Detection Delay |
Time 9ms |
|
|
Over Current Protection Condition |
Disconnect the load |
|
Short Protection |
Detection Condition |
Exterior Short Curcuit |
|
|
Detection Delay Time |
250uS |
|
|
Release Condition |
Disconnect the load |
|
Temperature Protection |
65ºC or 75ºC |
optional |
|
Internal Resistance |
MOSFET |
≤10mΩ |