Description
5-Volt RGB Addressable Pixel Strip for Arduino
This is Addressable LED Strip DC 5V. The installation surface must be smooth, clean, and dry. The part of LED components cannot be fixed on the surface of the sharp edges. The strip should not be collided or crushed. The strip can be cut following the cutting lines 24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel. The one-wire digital control interface with each RGB LED draws approximately 50 mA at 5V with red, green, and blue at full brightness.
- Input voltage: DC 5V
- Power:
- 30Leds/m ---- 6Watt/meter
- 60Leds/m ---- 12Watt/meter
- 74Leds/m ---- 14.8 Watts/meter
- 96Leds/m ---- 19.2 Watts/meter
- 144Leds/m ---- 28.8 Watts/meter
- LED Source: WS2812B Led(5050 SMD RGB LED with built-in upgraded version of WS2811 IC)
- LED: Each LED is controlled individually
- IC type: upgraded version WS2812 IC (built in the 5050SMD RGB LED)
- Of IC: 1 IC Drives 1 LED Chip
- Pixels: 30/60/74/96/144/meter
- Pitch: 16.6mm(1000/64)
- Gray Scale: 256
- Bits/Color: 8 bits/Color
- FPC Width:
- 30Leds/m --- 10mm
- 60Leds/m ---- 10mm
- 74Led/m --- 10mm
- 96Led/m --- 10mm
- 144Leds/m ---- 12mm
- FPC color: Black/White (Random)
- Protection rate: IP30/ IP65 /IP67
- Colors: Full Color RGB, Dream Color Changing
- Cuttable: Each LED is Cuttable
* Product Images are shown for illustrative purposes only and may differ from the actual product.